S7216A Термостаты с сенсорным управлением
Категория:
Термостат
Резюме:
Ключевое слово:
S7216A Термостаты с сенсорным управлением

This series room thermostat/controller takes use of the most advanced international microcomputer control CMOS chip. It can inspect the environment temperature through the internal or external NTC sensor. By comparing the ambient room temperature with setting temperature, it can control the valve to reach the comfortable and constant temperature.
Technical data:
Power Supply: 230VAC± 10% 50/60Hz
Consumption: <1.5W
Load Current: <5A
Accuracy: ±1ºC
Set-point Range: 5ºC~35ºC
Timing Error: <1%
Feature:
NTC Digital LCD Display, EL Backlight
Setting Turn-on/off within 24 hours
Adjustable manual 3-speed or automatic fan speed control; High, Medium and Low
When reach set-point, the motorized valve closed, but the fan coil still work.
Automatically control heating and cooling. The thermostat could identify to control heating or cooling automatically according to the set temperature. For example, when room temperature is 25℃ and set temperature is lower than it, thermostat will change over to cooling automatically. when room temperature is 25℃ and set temperature is higher than it, thermostat will change over to heating automatically.
Press and hold Mode button and Fan Speed button, and enter into temperature compensation to set the temperature by up button and down button, then confirm after 5 seconds. The max. temperature calibration range: -9℃-9℃.
Packaging:

Предыдущая страница
Предыдущая страница
S7217A Недельный программируемый цифровой Wifi термостат Контроллер температуры
